Nine Tips for Maintenance of Panel Office Furniture

2021/05/13
Many small owners who use panel classic office furniture may know that panel office furniture will fade after a long period of use, and will break if the maintenance work is not done properly. The thief feels distressed. So, how do you make these panel office furniture in your office last as long as new? Today, the editor of the office furniture factory gives you a few coups for maintaining panel classic office furniture. Master these, so that your old furniture can also become 'small fresh meat'! 1. The floor of the panel furniture must be kept flat, and the floor of the panel furniture must be kept flat, and the four legs should be balanced on the ground. If the office furniture is not stable, the fasteners will inevitably fall off over time and the bonding part will crack, which will affect the use effect. . When small pieces of office furniture need to be moved, the four corners must be lifted at the same time to avoid dragging them on the ground, so as not to affect the service life of office furniture. It is best to ask professional companies for help for large pieces of office furniture. 2. Remove dust with a soft cloth and clean stains. Often use a soft cotton cloth to wipe off the dust on the surface of the furniture along the direction of the wood grain. If the surface of the furniture is stained with ink, tape marks, etc., it is best to go to the store to buy a professional office furniture cleaner to clean it. 3. Polishing and waxing, long-lasting bright waxing can create a protective layer on the surface of the wood, so that the dust will slip off instead of sticking. Only a thin layer of wax needs to be applied to keep the furniture bright for a long time. 4. Gentle care, be careful when touching drawers, doors and other parts to open and close gently to avoid excessive force and damage caused by collisions. When cleaning, do not let the cleaning tools touch the office furniture. Always pay attention to avoid hard or sharp objects hitting the furniture. Avoid contact with corrosive liquids such as acids and alkalis. 5. Lifting and separating the floor, ironing the edge of the office furniture, if there is the phenomenon of lifting and separating, you can cover the surface with a thin cloth and iron it with an iron to restore it. 6. Dry and ventilate. Avoid exposure. Panel office furniture is more susceptible to damp. Keep indoor ventilation and dryness frequently to avoid damp and deformation of office furniture. Avoid exposing the furniture to the sun. 7. It turns yellow over time, and the white paint on the surface of office furniture will turn yellow over time and look very unfresh. If you use a small piece of sponge to adhere to the furniture cleaning wax that contains soft abrasive ingredients, you only need to wipe it once a month, and you can keep the white furniture always bright and new for a long time. 8. Scratch water marks, easily deal with it. Buy a crayon with a color similar to that of office furniture, apply a few times on the scratched area, and then wax again on the scratched part. If there are water marks on the wooden furniture accidentally, use a clean soft cloth coated with a small amount of salad oil or mayonnaise to wipe the water marks along the direction of the wood grain. 9. Cracks and holes, simple repair of office furniture will inevitably appear cracks and holes after a long time. At this time, just look for some useless old books and newspapers, cut them into crumbs, and then add an appropriate amount of alum, boil it with water, and embed it in the seam. It will be very firm after drying. You can also use white glue to adjust the sawdust evenly, embed it in the cracks, and polish it with sandpaper the next day, which is simple, economical and effective. Precautions for maintenance of panel furniture: 1. Avoid humidity and sun exposure. 2. Use a wrung out wet towel to avoid scratching the paint surface. 3. Avoid contact with corrosive liquids such as acids and alkalis. 4. The furniture should be wiped frequently to make it clean to avoid bacteria breeding. 5. Soft furniture such as cushions and sofas should be evenly stressed and avoid jumping on it to avoid damage due to excessive local stress. Regularly inspect the furniture connectors and reinforce them if they are loose. 6. The fabric of the furniture should be dry-cleaned. Avoid washing with water as much as possible to avoid fading; clean with some leather cleaners applied to leather and other parts, and avoid washing with soap, washing powder, etc. 7. Panel furniture can be cleaned with a small amount of water or a suitable amount of detergent on a towel, and the panels can be treated with furniture care wax regularly, and the cabinet should be kept clean.

Youbond Furniture Co., Ltd thinks that that firms can avoid the artificial choice between quantitative and qualitative risk management, allowing both to play important roles in surfacing and assessing risks.
Youbond Furniture Co., Ltd will become the destination store for customers, offering the convenience of multiple brands and channels, and providing a personal high touch shopping experience that helps create lifelong customer relationships.
There are many advantages associated with .
Youbond Furniture Co., Ltd have been an established and popular company with an excellent track record for the best customer satisfaction.
The team of engineers and developers at Youbond Furniture Co., Ltd are the best in their own way and we promise to provide timely service to our esteemed clients.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
English
Tiếng Việt
Українська
العربية
Español
italiano
русский
Current language:English